The SF45/B is the world's smallest, lightest, scanning microLiDAR®. This 5Hz oscillating sensor is highly configurable, with the ability to scan to 320°
*Included in the box: SF45/B microLiDAR® sensor, a communications cable, a USB to micro-USB cable and five screws, and 5 nuts.
- Detect and avoid
- Position hold
- IoT sensor
0.2 … 50 m / 0.6 ... 164 ft
Up to 5 000 readings per second and 5 sweeps per second
|Communication||USB, Serial UART and I2C (3.3 V TTL, 5 V tolerant)|
||-10° ... 50 °C / 14° ... 122°F|
|IP rating||Unit is IP42|
|Weight||57.94 g / 2.04 oz|
51 mm x 48 mm x 44 mm / 2 in x 1.9 in x 1.7 in
|Power supply||5.0 V ... 5.5 V|
|Integration||ArduPilot, ROS, Arduino, Raspberry Pi and LightWare Studio|
Refer to the product guide for more details
- The smallest, lightest, scanning microLiDAR® in the world
Accessories and options
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Doesn't work well in bright sunlight
Drivers were buggy, couldn't get signal strength working. Doesn't work under sunlight above 75klux. Indoors seem okay. Customer service was nice and responsive, but couldn't solve my issues.
Small and light obstacle detection system
This product is small and light, so it is not burdensome to be mounted on a small drone. It is also well-connected with ardupilot, showing the level of compatibility that can work immediately when connected. I am very satisfied with the performance of the product, but I expect it to be a little difficult for SLAM because the rotation speed is slower than I thought.
So far, rather limited. Worked well out of the box connected to the PC. Have not connected it to the rover yet. More mods to make to accept it. Was surprised that the PC program did not show distance as the LiDAR painted the shop accurately.
Lightweight and best performance. Very satisfied.